Salamander Pumps

Call Directions Website Contact the establishment

Salamander Pumps Manufacturer of gravity and mains-fed water boosting pumps based in Sunderland Tyne and Wear 🦎 We have products to suit most consumers showering requirements.

Based in Sunderland, Tyne and Wear, we have been manufacturing shower pumps now for over 25 years. Our products are made almost entirely from EU sourced components with some 90% of our components sourced from within the UK. We are proud of our heritage as a strong and growing UK manufacturer. Having grown exponentially in the last decade, Salamander Shower Pumps are now firmly established as one of the leading manufacturers of shower pumps in the UK. Our product range is considerable not just in its scale, but its quality and attention to detail.

02/11/2026

Built to leak? 💧

The TankBoost CAT5 uses a Type AB air gap to maintain a physical separation between the mains inlet and the water stored inside the tank.

Richard explains how the TankBoost CAT5 works and where it can be installed.

Find out more by clicking the link in our bio 🔗

Join Training Manager, Richard, for a hands-on training day focused on building confidence and practical skill in boosti...
25/10/2026

Join Training Manager, Richard, for a hands-on training day focused on building confidence and practical skill in boosting water performance across both mains-fed and gravity-fed systems.

This session gives you the chance to work directly with our products and understand installation best practices.

📍Staffordshire Training Services ST16 3HS

✍🏻Follow the link the reserve your place: https://Salamander_Installer_Training.eventbrite.co.uk

21/10/2026

Get to know the Right Pump range👀

Designed to give a powerful and quiet performance in a gravity-fed system, the Right Pump range are ideal for properties with a higher water demand.

19/10/2026

Installing a TankBoost? 💧

Getting the connections right is key to a safe and successful setup.

With only three connections, installing a TankBoost is simple.

Watch our Technical Training Manager, Richard, talk through each TankBoost connection, what its for and what to expect when unpacking the unit before installation.

To find out more about TankBoost visit 👉 https://www.salamanderpumps.co.uk/products/tankboost/

15/10/2026

“AquaScan is the only thing I use now”
⭐️ ⭐ ️⭐️ ⭐️ ⭐️

Don’t just take our word for it...

We asked installers what they really think of AquaScan, our 4-in-1 digital water multimeter, and how it helps them on the job.

Interested in finding out more about how AquaScan can support you?
Visit our website for more information 👉 https://www.salamanderpumps.co.uk/products/aquascan/

What is a WRAS-approved product? A WRAS-approved product has been tested to ensure it complies with the requirements of ...
14/10/2026

What is a WRAS-approved product?

A WRAS-approved product has been tested to ensure it complies with the requirements of the Water Supply (Water Fittings) Regulations and Scottish Byelaws.

Whilst other companies supply products that do not meet the regulations, TankBoost is WRAS approved.

09/10/2026

Tomorrow, Saturday 10th October, marks World Mental Health Day.

We sat down with our Mental Health First aiders to find out why they wanted to take on this important role and why they believe businesses should prioritise the mental well-being of their employees.

In the UK alone, 1 in 4 adults experience mental health problems each year, meaning that even if you personally have never been affected, there’s a high chance someone close to you has.

Here at Salamander Pumps, we have many initiatives in place to support our teams mental well-being, but we know there is always more to learn and improve upon and we are committed to doing so.

Take this day as a reminder to check in on those around you and reach out if you are struggling - a problem shared is a problem halved💚

08/10/2026

AquaScan is a 4-in-1 digital multimeter designed to precisely measure:

💧Flow
💧Pressure
💧Temperature
💧TDS*

SmartPipe Plumbing Services used AquaScan on a customers garden tap to measure these factors.

AquaScan is easy to use and versatile, often used for site surveying, boiler commissioning and product specification.

Watch the video to see how AquaScan works and visit our website to find out more 👉https://www.salamanderpumps.co.uk/products/aquascan/aquascan-multimeter/

*Total dissolved solids give an indication of water hardness.

Address

Unit 2C Colima Avenue
Sunderland
SR53XE

Opening Hours

Monday 8:30am - 4:30pm
Tuesday 8:30am - 4:30pm
Wednesday 8:30am - 4:30pm
Thursday 8:30am - 4:30pm
Friday 8:30am - 2:30pm

Telephone

01915162002

Website

Alerts

Be the first to know and let us send you an email when Salamander Pumps posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to Salamander Pumps:

Shortcuts

Share

Nearby bars and pubs

Other Sunderland bars and pubs

Show All