ZM Fabrication & Repair LLC

ZM Fabrication & Repair LLC Here at ZM Fabrication we offer high quality designs, fabrication and repair work.

From field repairs to full fabrication, we keep equipment working and downtime to a minimum.✔️ Welding & fabrication✔️ M...
05/27/2026

From field repairs to full fabrication, we keep equipment working and downtime to a minimum.

✔️ Welding & fabrication
✔️ Mechanical & hydraulic repairs
✔️ Equipment service & maintenance
✔️ Trailer repairs
✔️ Vehicle frame repair
✔️ Equipment transport & moving
✔️ Bucket rebuilds & cutting edges
✔️ Farm equipment repair
✔️ Custom fabrication & modifications
✔️ On-site and shop repairs

From excavators and tractors to trailers, mowers, planters, conveyors, and attachments — we handle jobs big and small. Whether it’s broken down in the field or needs work in the shop, we’ll get it fixed and back to work.

Quality repairs, dependable service, and work built to last.

Message or call today — welding, fabrication, mechanical work, transport, and much more.

Started with a frame that was completely rotted out and cracking apart. Cut out all the bad metal, built all repair patc...
05/16/2026

Started with a frame that was completely rotted out and cracking apart. Cut out all the bad metal, built all repair patches in-house, and brought this chassis back to life with fresh steel from front to rear.

A lot of cutting, fitting, welding, and fabrication went into this one, but the end result came out solid. Finished everything off with a full Fluid Film protection inside and out to help keep the rust away and protect all the fresh work.

If your frame has issues or you just want it looked over to insure safety give us a call!

When your suspension parts start looking back at you…Whipped up these air bag mounts and apparently gave them a little p...
05/03/2026

When your suspension parts start looking back at you…

Whipped up these air bag mounts and apparently gave them a little personality along the way. Not gonna lie—they look a bit concerned about what’s coming next.

Clean cuts, solid plate, and ready to handle whatever this setup throws at them… even if they don’t look fully confident about it... we're confident!

Contact us for custom parts! Occasionally faces?

Customer brought in a older 4 runner frame that was completely rotted through and structural integrity gone. This isn’t ...
05/03/2026

Customer brought in a older 4 runner frame that was completely rotted through and structural integrity gone. This isn’t the kind of rust you cover up… it had to be cut out and rebuilt the right way.

• Cut out all compromised sections
• Fabricated and fitted new steel frame sections
• Rebuilt mounting points and reinforced weak areas
• Fully welded everything back to spec
• Sealed and coated the entire frame for long-term protection

End result: solid, clean, and back to being structurally sound.

Jobs like this take time, precision, and doing things the right way. Not the quick way. If your frame looks questionable, don’t ignore it… it only gets worse.

Boat dock hinge repair.This 1/2" aluminum plate needed to be straightened and reinforced, so we welded on a C-channel to...
05/03/2026

Boat dock hinge repair.

This 1/2" aluminum plate needed to be straightened and reinforced, so we welded on a C-channel to add strength and keep it from flexing. We also drilled access holes to fit a 15/16 socket, allowing the hardware inside the dock frame to be properly tightened.

Kept breaking U-bolts on this setup, so we stepped it up. Small but very important. Upgraded to 1/2” plate with grade 8...
05/03/2026

Kept breaking U-bolts on this setup, so we stepped it up. Small but very important.

Upgraded to 1/2” plate with grade 8 hardware for a much stronger hold. Everything tightened up solid and built to handle the abuse.

No more failures—back to work getting ready for the season!

Another one back up and out the door.Plasma cut the old bushing out after the pin twisted off. Cleaned everything up, st...
05/03/2026

Another one back up and out the door.

Plasma cut the old bushing out after the pin twisted off. Cleaned everything up, straightened the 3/8” and 3/4” plate, and machined new bushings to fit right.
Set the new bushings in place using the pin for alignment, fully welded everything out, and finished it off with a new grade 8 bolt.

Tight, straight, and ready to work again.

Knocked out another bucket rebuild.Removed the worn shanks using carbon arc gouging, cleaned everything up, and burned i...
05/03/2026

Knocked out another bucket rebuild.

Removed the worn shanks using carbon arc gouging, cleaned everything up, and burned in new shanks. Finished it off by installing a fresh set of teeth, ready to get back to work.

03/23/2026

We are closed till next week! Much needed vacation 🤩

Had an older quad plow frame that was bent and twisted pretty bad. Customer was not able to get a replacement due to it ...
03/11/2026

Had an older quad plow frame that was bent and twisted pretty bad. Customer was not able to get a replacement due to it being discontinued.

Took some measurements bent up some tube and made a full new receiver section.

Address

219 Main Street
Andover, NJ
07821

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm

Telephone

+19738627807

Website

Alerts

Be the first to know and let us send you an email when ZM Fabrication & Repair LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to ZM Fabrication & Repair LLC:

Shortcuts

Share