Scansim Flightsimulation

11/02/2016

http://secure.simmarket.com/scansim.mhtml
Scansim Flightsimulation

11/02/2016

http://secure.simmarket.com/scansim-fly-to-ekch-copenhagen-kastrup-v3-fs9.phtml

11/02/2016

http://secure.simmarket.com/scansim-fly-to-ekch-copenhagen-kastrup-v3-fsxp3d.phtml

26/03/2015

SCANSIM Piper Pa28 140 Cherokee Cruiser & Sea Plane with Floats v2.0 "FSX SP2" / "Prepar3D v1.4" / "Prepar3D v2.5"
Availble now; http://secure.simmarket.com/scansim-piper-pa28-140-cherokee-fsxp3dv1p3dv2.phtml

26/03/2015

Piper Pa28 140 Cherokee Cruiser FSX/P3D! v2.0 Availble now!!!

The Piper PA-28 Cherokee is a family of light aircraft designed for flight training, air taxi, and personal use. It is built by Piper Aircraft. All members of the PA-28 family are all-metal, unpressurized, single-engine, piston-powered airplanes with low-mounted wings and tricycle landing gear. They all have a single door on the copilot side, which is entered by stepping on the wing. The Piper PA28-140 Cherokee, vas the oldest piper in the cherokee-series first produced in 1960. The PA28-140 Cherokee Cruiser was first certified on 14 February 1964, and was approved on 17 June 1965.

This Aircraft and all files distributed within it are payware copyright SCANSIM Flightsimulation, however there will be an UPDATE OFFER 50% for all who purchased the FREE SCANSIM - Piper Pa28-140 Cheerokee v1.2 FSX/P3D. Those who paid for the first version, will offcause get this the new version FREE.

This is the Sixth's version of the aircraft, but with a completely reworked 3D VC with lots of new details and grapich overhall, 3D Gauges as well as 2D Panel for FSX SP2 or Acceleration and Prepar3D v1.4 as well as Prepar3D v24, and I solved a lot of bugs and added a fully functional 3D Radio Stack in the VC. Let me know if theres any bugs remain, and if I get the time, I will fix them in future updates.

Let's go fly Piper Pa28-140 Cheerokee FSX/P3D!

Features:

Piper Cherokee 140 OY-DHD, Piper Cherokee 140 C-FTVW, Piper Cherokee 140 C-FWOJ, Piper Cherokee 140 White.
Piper Cherokee 140 on Floats C-GYGD, Piper Cherokee 140 on Floats N7866W and Piper Cherokee 140 on Floats White.

News in v2.0

•Detailed exterior models with opening pilot's window, dynamic shine, Panel & Cabin Light on/off.
•Detailed intetior cabin with inside reflection Windows & Panel & Cabin Light on/off.
•Detailed intetior cabin with opening pilot's window, climate controls, cabin ventilators and sun visors.
•Detailed fully functional virtual cockpit to match the real Pa28-140 instrumentation.
•Custom 3D Animated Gauges with reflection Glasses on all the instrumentations in the Virtual Cockpit.
•Fully functional 3D Radio Stack with reflection Glass on the COM/NAV in the Virtual Cockpit.
•Fully functional Autopilot.
•Fully functional 2D cockpit with moving Yokes, Radio Stack and Panel & Cabin Light on/off.
•Fully animated control surfaces.
•Stroboscopic propeller effect and very realistic propeller animation.
•Flex Wings.
•Hydralic gear.
•Opening door with animated door handles.
•Opening pilot's window with animated handles.
•Opening engine cowls.
•4 Different models, 3 variants of the Cherokee and the Sea Plane added Floats
•6 different Liveries.
•Paintkit for experienced users to create their own repaints.
•Checklist.
•Pilots operational manual and handbook to the real Piper PA-28-140.
•Dynamic shine, FSX Materials with Bump and Specular Mapping.
•DX9, DX10 & DX11 compatible ( FSX SP2 DX10 Preview ), ( P3D v1.4 DX9 ) & ( P3D v2.4, DX11 ).
•Realistic ground behavior and Aerodynamics in the air compared to the real Piper Pa28 140. Tested by real Pa28-140 pilots.
•Real weight, balance & engine performance as well as airplane geometry.
•Realistic night lights effects on the Virtual Cockpit dashboard & the interior roof as well on the 2D panel.
•Excellent frame rates.

23/03/2015

CUSTOMER REVIEWS
FIVE STARS from 3 Customer Reviews

Michael Copp *Verified Product User*
2015-03-22 19:58:49

I'm a real-life owner of a 1965 PA140, and I decided to pick up a copy of ScanSim's PA140 model for FSX and Prepar3d several months ago (at the time it was version 1.4). I do a lot of flying on the flight simulator between my real-world flights to keep myself sharp, often using it to fly a "test" version of a real-world trip that I have planned for the next week, that sort of thing. As well, procedures that allow me to accurately step through my walk-around and checklist are important, so when I'm looking at an aircraft model for flight simulation I want both the external and cockpit details to be as close to the actual aircraft as possible.

When I found ScanSim's PA140 model, I was hoping for great things - and it delivered! The flight characteristics performed exactly as expected (speed points are on the numbers, climb and decent rates are bang on, etc.). As well, all features from the real-world existed in the model, allowing my flight procedures from haul-out to tie-down to be as realistic as possible.

Now, with the impending release of version 2.0, ScanSim has doubled-down on the quality of the visual models, the animated realism, and the flight-model itself. I've tested the flight characteristics in the new model, and I concur that ScanSim has taken the reality to the next level when compared to my real-world aircraft. As well, the new animated surfaces really add to the immersion (it's great being able to look over my left shoulder and see that stabilator going up and down as I perform the controls check!). This soon to be released version is a significant upgrade to an already excellent product, and at this price point the value can't be beat!

Gary Guernsey *Verified Product User*
2015-01-04 18:31:46

Love the airplane and all its modern upgrades.Flys and looks great and am proud to have and own it. Thanks Claus. Lee(Gary)

william scales *Verified Product User*
2014-10-20 05:12:44

Great little aircraft for very enjoyable GA flying! Scansim did a great job in giving you the real performance feel of the actual Pa28-140, when flying.
Keep up the Great work!!

Thanks!
Bill

23/03/2015

Is there a new version of your Piper Cherokee available?
Michael Copp to Claus Vendelboe Holmberg / Scansim Flightsimulation;

Claus,

The new model flies great, and looks even better!
Next Saturday, I'm planning a real world flight over to Charlottetown to attend a "Rust Remover" seminar (Clubs host these every spring across Canada - they help pilots get back into a flying state of mind after our long winter!). Here's a link to the flight plan:

http://skyvector.com/?ll=45.87369236628738,-63.285095207574805&chart=301&zoom=4&plan=A.CY.CCQ3:A.CY.CYYG

As is my usual practice, I decided to do a simulated version of the flight over to Prince Edward Island and back in Prepar3d (just to warm me up for the real thing). Of course, I used your new excellent WOJ model, along with SimAddons equally excellent airport sceneries for both Debert and Charlottetown (SimAddons actually does a very good job of modelling most of the airports in my region):

http://www.simaddons.com/

To have a little bit of fun, I captured some screen shots during my flight, and put them together like a comic book - I hope you like them!

The flight was great, and the flight characteristics of the new model performed exactly as expected (speed points seemed to be on the numbers, etc.). The new animated surfaces really add to the immersion as well (it's great being able to look over my left shoulder and see that stabilator going up and down as I perform the controls check!). There were a couple of *very* minor things that I noticed (so minor that they may just be something to do with my setup rather than your model):

- When I switch to the model for the first time, and I'm still sitting on the ground, it seems like the hands in the altimeter don't respond when I adjust the barometric pressure (it seems to work fine once I've taken off though)

- When I click on the door handle, the door will start to open but then it will quickly shut without me clicking on the handle again (however, I run TrackIR, XMouse, and AutoHotkey, to help with panning around the scene, etc. so one of those applications may be interfering with the animation as well)

Overall, this new version is a great upgrade (and I get a kick flying a plane in the simulator that has the same paintjob as my real plane!).

Thanks for everything,
Michael

21/03/2015

ScanSim Copenhagen Airport Official Promo!!!

Videoen er produceret af Daniel L. Goz , EKCH Video & Effects. ( Dantorp11 ) til SCANSIM Flightsimulation.
Soundmix by Simon Nordendal / AzuraFiles

This new scenery from Scansim provides a detailed scenery, without sacrificing good framerates. This package features the complete Airport built in Gmax with photorealistic ground textures (Summer, night and winter variation) in a sensational resolution up to 0.6m/pixel. The scenery features exact coastlines, mesh and a completely new designed airport located 100% correct. This add-on also includes dynamic apron traffic, as well as road traffic in the vicinity of the airport. The included detailed AFCAD and AI Aircrafts compatible with default traffic, makes it a lively and highly realistic airport to fly to. You might find scenery with better graphics, but this will be at the cost of framerates - The EKCH Copenhagen Airport is designed to be usable in conjunction with great scenery's like Denmark Scenery rendering a detailed Copenhagen city center right next to the airport.

Let's go fly to Copenhagen Airport!

SCANSIM - FLY TO EKCH COPENHAGEN KASTRUP V3 FSX/P3D

System requirements for Microsoft Flight Simulator X & Lockheed Martin Prepar3D:

• Microsoft Flight Simulator X ( Acceleration or SP1 and SP2 )

• Lockheed Martin Prepar3D

• Windows XP / Vista / Windows7 ( 64 bit advised )

• 3.0 Ghz Processor ( Dual2Core Intel advised )

• 4 GB RAM ( 8 GB adviced )

• 3D graphics cardwith at least 512 MB ( 2024 MB adviced )

• Installation-Size: 412 MB incl. AI aircrafts and flyable Airbus A319 with VC

Installation:

• Very IMPORTANT ! "Remove" the previus version of "EKCH Copenhagen Airport, Kastrup X", before installation of this update !

• Follow the instructions, when execute the NEW "SCANSIM_EKCHCopenhagenKastrupX_FSX.exe" or "SCANSIM_EKCHCopenhagenKastrupX_P3D.exe"

News in v3.0

• All Terminal buildings updated, with lots of details

• Oresund bridge with Artificial island & tunnel on the west side, & realistic ground on the east side

• Realistic Saltholm island with new seasonal and night textures, & 3D buildings

• Barseback Powercraft with Photorealistic ground

• On the Swedish side the Turning Torso building has been added in Malmoe city.

• Special light effects at night in Copenhagen City

Features:

• New designed Airport built in Gmax with day, night and winter textures

• All Terminal buildings changes to RealWorld, with lots of new details

• Airport ground area up to 0,6m/pixel resolution, with day, night and winter textures

• The Oresund bridge with Artificial island and tunnel on the west side, and Photorealistic ground on the east side

• Moving traffic on the bridge and into the tunnel

• The Photorealistic Saltholm island with new Seasonal and night textures, and 3D buildings

• Barseback Powercraft with Photorealistic ground on the Swedish side

• Turning Torso building in Malmoe on the Swedish side

• Vegetation with Summer, Night and Winter variation

• Seasonal and night textures / Special light effects at night

• Animated IK Jetways custom built in Gmax

• Docking systems, for parking help

• Dynamic and animated apron vehicles

• Dynamic and animated Highway and Road vehicles

• Highly and accurate detailed AFCAD files for AI traffic

• Alternative Afcad with NO limits on RWY’s ( For use without AI Aircrafts )

• Alternative Afcad with start and landing limits on the RWY’s ( For use without AI Aircrafts )

• Alternative Afcad with NO Oil treated surfaces on Apron, Taxiways and RWY’s ( For use with FSPassenger )

• Alternative Afcad with NO Oil treated surfaces and NO limits on RWY’s ( For use with FSPassenger and without AI Aircrafts )

• Taxiways and apron with lots of details

• Lots of taxiway and runway signs according to original plans

• 3D Approach lights ( Available by radio at day in low visibility )

• Animated flags

• Animated radars

• Animated birds

• New AI-aircraft built in Gmax / FSX Gamepack ( "Shadow" option available )

• Flyable Airbus A319 with VC ( Default A321 )

• Excellent frame rates

• User manual in start menu, with installation advice and Support

• Compatible with Airport Enhancement Services ( AES v2.10 or later)

This Scenery is compatible with default FSX and scenery like Denmark Scenery, Denmark Map X, DanVFR and Newport Photo real Copenhagen X and Airport Enhancement Services ( v2.10 or later ).

Scenery is not DX10 compatible.

21/03/2015

21/03/2015

SCANSIM Piper Pa28 140 Cherokee Cruiser & Sea Plane with Floats v2.0 "FSX SP2" / "Prepar3D v1.4" / "Prepar3D v2.5"

Features:

Piper Cherokee 140 OY-DHD, Piper Cherokee 140 C-FTVW, Piper Cherokee 140 C-FWOJ, Piper Cherokee 140 White.
Piper Cherokee 140 on Floats C-GYGD, Piper Cherokee 140 on Floats N7866W and Piper Cherokee 140 on Floats White.

News in v2.0

•Detailed exterior models with opening pilot's window, dynamic shine, Panel & Cabin Light on/off.
•Detailed intetior cabin with inside reflection Windows & Panel & Cabin Light on/off.
•Detailed intetior cabin with opening pilot's window, climate controls, cabin ventilators and sun visors.
•Detailed fully functional virtual cockpit to match the real Pa28-140 instrumentation.
•Custom 3D Animated Gauges with reflection Glasses on all the instrumentations in the Virtual Cockpit.
•Fully functional 3D Radio Stack with reflection Glass on the COM/NAV in the Virtual Cockpit.
•Fully functional Autopilot.
•Fully functional 2D cockpit with moving Yokes, Radio Stack and Panel & Cabin Light on/off.
•Fully animated control surfaces.
•Stroboscopic propeller effect and very realistic propeller animation.
•Flex Wings.
•Hydralic gear.
•Opening door with animated door handles.
•Opening pilot's window with animated handles.
•Opening engine cowls.
•4 Different models, 3 variants of the Cherokee and the Sea Plane added Floats
•6 different Liveries.
•Paintkit for experienced users to create their own repaints.
•Checklist.
•Pilots operational manual and handbook to the real Piper PA-28-140.
•Dynamic shine, FSX Materials with Bump and Specular Mapping.
•DX9, DX10 & DX11 compatible ( FSX SP2 DX10 Preview ), ( P3D v1.4 DX9 ) & ( P3D v2.4, DX11 ).
•Realistic ground behavior and Aerodynamics in the air compared to the real Piper Pa28 140. Tested by real Pa28-140 pilots.
•Real weight, balance & engine performance as well as airplane geometry.
•Realistic night lights effects on the Virtual Cockpit dashboard & the interior roof as well on the 2D panel.
•Excellent frame rates.

21/03/2015

Thumbnal from upcoming update
SCANSIM Piper Pa28 140 Cherokee Cruiser & Sea Plane with Floats v2.0 "FSX SP2" / "Prepar3D v1.4" / "Prepar3D v2.5"

23/03/2014

Follow My Support Forum here;
http://www.fsonline.dk/forum/viewforum.php?f=5