Blue Bar Industries

Call Directions Website

Blue Bar Industries Blue Bar Industries is a specialised manufacturer of 12v looms and adaptors to power campers and caravans.

We have an extensive range of Power leads and adaptors to enable you to get the power you need to run your camping equipment.

Choosing between a battery isolator and a VSR can make a big difference to how reliably your dual-battery system perform...
24/10/2026

Choosing between a battery isolator and a VSR can make a big difference to how reliably your dual-battery system performs. This guide breaks down how each option works, where it suits 12V and 24V setups, and what to consider for 4WDs, caravans, boats and off-grid applications. It’s a practical comparison to help you select the right solution for your vehicle, equipment and installation requirements.

https://bluebarindustries.com.au/battery-isolator-versus-vsr/

AMPSEAL connectors are built for demanding 12V and 24V applications, but only when they’re assembled correctly. This gui...
22/10/2026

AMPSEAL connectors are built for demanding 12V and 24V applications, but only when they’re assembled correctly. This guide covers the key steps, from preparing the terminals and seals to achieving a secure, weather-resistant connection. It’s a practical reference for auto electricians, installers, mechanics and DIY vehicle builders who need wiring that stands up to vibration, moisture and harsh Australian conditions.

https://bluebarindustries.com.au/how-to-install-ampseal-connector/

The right battery accessories can make the difference between a tidy, reliable 12V or 24V setup and a frustrating electr...
20/10/2026

The right battery accessories can make the difference between a tidy, reliable 12V or 24V setup and a frustrating electrical fault waiting to happen. From isolators and terminals to leads, connectors and protection, every component needs to suit the vehicle, the load and the conditions it will face. “Vehicle Battery Accessories That Earn Their Place” looks at the practical essentials worth fitting in workshops, 4WDs, caravans, boats and off-grid systems—without the unnecessary add-ons.

https://bluebarindustries.com.au/vehicle-battery-accessories/

Choosing the right plug for a fridge isn’t just a matter of matching voltage. This guide breaks down the practical diffe...
18/10/2026

Choosing the right plug for a fridge isn’t just a matter of matching voltage. This guide breaks down the practical differences between 12V, 24V and 240V setups, helping you select the right option for your 4WD, caravan, boat, workshop or off-grid system. It also covers compatibility, wiring considerations and reliable performance in real Australian conditions—so you can avoid costly mistakes and build with confidence.

https://bluebarindustries.com.au/which-plug-suits-a-fridge/

A winch is only as reliable as the wiring behind it. Our Winch Wiring Safety Guide for Australian 4WDs covers cable sizi...
16/10/2026

A winch is only as reliable as the wiring behind it. Our Winch Wiring Safety Guide for Australian 4WDs covers cable sizing, fusing, connections and installation practices to help prevent voltage drop, overheating and avoidable faults. Built for the realities of off-road recovery and harsh Australian conditions, it’s a practical reference for 4WD owners, installers and workshop professionals.

https://bluebarindustries.com.au/winch-wiring-safety-guide-australian-4wds/

Thinking about fitting a 12V inverter in a vehicle, caravan, boat or off-grid setup? Ventilation is more than a nice-to-...
14/10/2026

Thinking about fitting a 12V inverter in a vehicle, caravan, boat or off-grid setup? Ventilation is more than a nice-to-have—poor airflow can lead to overheating, reduced performance and avoidable component failure. This guide explains where inverters should be installed, how much ventilation they need and what to consider when building a reliable system in Australian conditions.

https://bluebarindustries.com.au/do-inverters-need-ventilation/

Choosing the right 24V LED floodlight matters when you’re working after dark, setting up camp or fitting out a touring v...
12/10/2026

Choosing the right 24V LED floodlight matters when you’re working after dark, setting up camp or fitting out a touring vehicle. Our guide compares dependable options for brightness, beam spread, durability, power draw and practical installation across workshops, fleets and off-grid setups. Find the key specs to consider before you buy, with a clear focus on reliable performance in tough Australian conditions.

https://bluebarindustries.com.au/best-24v-led-floodlights/

A secure fuse holder is a small part of a 12V or 24V system, but mounting it poorly can lead to vibration damage, moistu...
10/10/2026

A secure fuse holder is a small part of a 12V or 24V system, but mounting it poorly can lead to vibration damage, moisture ingress and unreliable protection. Our latest guide covers practical mounting considerations for vehicles, caravans, marine applications and off-grid setups, including location, cable routing and protection from the elements. It’s a straightforward reference for getting the installation right the first time, whether you’re fitting out a new system or troubleshooting an existing one.

https://bluebarindustries.com.au/how-to-mount-fuse-holders/

On the road, automotive fittings need to handle vibration, moisture, heat and constant use—not just look the part on the...
08/10/2026

On the road, automotive fittings need to handle vibration, moisture, heat and constant use—not just look the part on the workbench. This guide covers the connectors, terminals and cable accessories that help 12V and 24V systems stay secure and reliable in vehicles, caravans, boats and work fleets. It’s a practical reference for choosing fit-for-purpose components that stand up to real Australian conditions.

https://bluebarindustries.com.au/automotive-fittings-that-hold-up-on-the-road/

Cutting battery cable cleanly takes the right tool—especially when you’re working with heavy-gauge cable in a 12V or 24V...
06/10/2026

Cutting battery cable cleanly takes the right tool—especially when you’re working with heavy-gauge cable in a 12V or 24V setup. Our guide to the best cable cutters for battery cable in Australia compares practical options for workshops, auto electrical work, 4WDs, caravans, marine systems and off-grid installations. Find out what to look for in a dependable cutter, from cutting capacity and leverage to build quality and day-to-day usability.

https://bluebarindustries.com.au/best-cable-cutters-for-battery-cable/

Address

Caboolture, QLD
4506

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 3pm

Telephone

+61401850511

Website

Alerts

Be the first to know and let us send you an email when Blue Bar Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share