Billet Bike Bits

Home
United Kingdom
Poringland
Billet Bike Bits

Billet Bike Bits, as the name suggests, design and make billet parts for custom bikes, streetfighter

01/11/2026

These huge Stealth yokes are for Morning Roy, there for a highly modified 1992 HD FXR frame that’s taking a 2023 HD M8 Drive train, Big 58mm USD forks at 270mm centres.
The top of the steering stem is metric, allowing a large choice of locknuts and topnuts (like GSXR1100) while retaining the Harley Imperial bearings.

01/11/2026

Some Billet Handlebars ready to ship out.
I also do these to take Motogadget Speedos.

29/10/2026

Another set of raked Triumph Rocket 3 yokes. These are raked, which means the legs are no longer parallel to the steering stem, but several degrees further out, reducing the trail a lot. Why? When you convert a bike into a trike, or fit a sidecar, the steering becomes very heavy. Reducing the trail to a point that would make a bike unstable, has the effect of giving a trike or sidecar outfit power steering.
I make these for loads of different Trikes.

24/10/2026

These raked yokes are for a Kawasaki GT750 shaft drive trike, to take a ZX10 front end. I also had to make a Speedo housing for the GPS Speedo.
It's all very tidy, and the 5 degrees of rake will lighten the steering 👍

21/10/2026

Let's try that again without the troll (now deleted and blocked)
I've had another non payer. Radio silence from the USA.
If anyone is interested, these are for a Gen 1 Vmax, and to take an R1, FZ1, ZX7, ZX10 (pre 2012) front end (maybe more), basically 50mm/54mm forks at 210mm centres.
They may need extensions too, which I can supply as well (see pic).
These yokes are normally £550 + £110 for the extensions, if required, totalling £660.
I'll sell them for £450, or £540 with the extensions, ready to ship.
Please share this to anyone with a Vmax. Thanks

16/10/2026

Here we go again ☹️. Looks like another non payer. Radio silence for a week, and they are in the USA.
If anyone is interested, these are for a Gen 1 Vmax, and to take an R1, FZ1, ZX7, ZX10 (pre 2012) front end (maybe more)
They may need extensions too, which I can supply as well (the slide over type).
These yokes (without extensions) are normally £550. I'll sell them for £450, ready to ship.
Please share this to anyone with a Vmax. Thanks

15/10/2026

These Reverse Thug yokes are for an R1 with a Busa front end, and have a set of my Billet Handlebars to complete the look.
These are destined for the Emerald Isle.
Have a browse of my site billetbikebits.com

13/10/2026

Raked yokes for a Harley Dyna Lowrider trike.
These lighten the heavy steering that bike based Trikes suffer from.

05/10/2026

A customer's Honda CBX with a later GSXR swingarm, and a set of my Thug yokes holding on to a CBR1000SR front end.
Very tidy. Looks like it left the factory that way 👍

02/10/2026

Done several ZRX1200 yokes recently.
The ones on the left are to take a ZX9 front end. The ones on the right are for the standard ZRX forks, and currently winging their way to the USA

Address

Mill Farm, Mill Lane, Brooke NR15 1EX
Poringland
NR15 1EX

Telephone

07507001603

Website

http://www.billetbikebits.com/

Alerts

Be the first to know and let us send you an email when Billet Bike Bits posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.